PHOSPHATE REMOVER 1LT
(90PR1L): AQUAPRO PHOSPHATE REMOVER 1LT
The ORIGINAL Patented Phosphate Remover designed to be used as a maintenance and preventative solution this unique formulation is highly concentrated and is safe to use with fish, mammals and in aquariums.
Benefits:
• Removes phosphates (algae nutrients)
• Without phosphates, algae cannot grow
• New formulation
• Dramatically clarifies water giving instant satisfaction
• Does not cloud water (unlike other phosphate removers)
• Minimal filter pressure increase (see important notes below)
• Enhances chlorine production
• Enhances the performance of ALL other pool chemical treatments
• Compatible with all sanitisers (including Nature 2 and Ionisers)
Important Notes:
• Shake container well before use
• Check filter pressure before you add Aquapro Phosphate Remover
• If pressure is high, clean cartridge prior to adding Aquapro Phosphate Remover
• Add directly to skimmer with filter running normally
• Can be used in freshwater/saltwater aquariums, lakes and ponds
• Safe with fish and mammals
• Non-toxic and biodegradable
Where do phosphates come from?
Phosphates are organic building blocks that form when phosphoric acid reacts with various
elements found in nature. Phosphates come from leaves, fertilizers, and bather wastes such
as sweat and urine. Other phosphates sources are detergents, some insecticides, soft drinks,
toothpaste and even some pool chemicals.
How much phosphate is too much?
As little as 0.2 ppm of phosphate can result in outbreaks. Interestingly, in cases where pools
have excessive outbreaks, the test may register a very low or zero reading on the Phosphate
Test Kits. This is because virtually all of the phosphate has been consumed. This phosphate
is now organically bound and is not measured by the test. When outbreaks are treated (super
chlorination and / or the addition of a Aquapro Algaecide), this organically bound phosphate will be released into the water.
Dosage Charts
Phosphate Level (PPM) Number of 250ML Doses
Required at 3 Day Intervals
0.3 2
0.4 3
0.5 4
Pools UP TO 50,000Litres
0.8 6
1.0 8
1.5 12
Phosphate Level (PPM) Number of 500ML Doses
Required at 3 Day Intervals
0.3 2
0.4 3
0.5 4
Pools OVER 50,000Litres
0.8 6
1.0 8
1.5 12